Home > Products > Power Supply > Water-Proof Power Supply

Water-Proof Power Supply

SW-10W-12

15W Water-proof Power Supply
DC12V 0.83A
100% full load burn-in test
Product description: Waterproof SMPS is designed to apply to LED application that is installed in water or humidity environment. The IP rating is IP67. Waterproof power supply can be installed in shallow water.
INQUIRY

Features:
10W Single Output Water-proof Power Supply
Output voltage & current: DC12V 0.83A
Input voltage range: 180~264VAC
Built in EMI filter with tiny ripple
100% full load burn-in test
Air Cooling
Protection: Short circuit/ Overload/ Over voltage/ Over temperature
Built-in constant current limiting circuit (C.C.+C.V.mode)

Specification:

Model		SW-10W-12
Output	DC output Voltage	12V±1%
	Output Current Range	0-0.83A
	Wave and Noise	120mVp-p
	DC output Power	10W
	Efficiency	85%
	DC Voltage Adjustable Scope	（at full load）≦0.5%
Input	Voltage Range	85~264VAC 47-63Hz
	Input Current	0.05A/230V
	Leakage Current	<1mA/ 240VAC
	Inrush Current	Cold start 36A/ 230VAC
Protection	Over-load	105%~135%, Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Over-voltage	105%---150% Rated Voltage, Protection type: Shut off
	High-temperature	RTH3>=65°C FAN ON<=55°C FAN OFF>=80°C Cut off output(5~15V)
Environment	Working temperature and humidity	-10°C~+50°C, 20~90%RH
	Store temperature and humidity	-20°C~+85°C, 10~95%RH
	Temperature coefficient	±0.03%°C(0~50°C)
	Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES
Safety	Withstand voltage	I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC
Safety	Isolation resistance	I/P-O/P,I/P-FG,O/P-FG: 100M Ohms/500VDC
Standard	CE EMC Standard	EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-33:2013
	CE LVD Standard	EN61347-2-13:2014+A1:2017, EB61347-1:2015
	ROHS Standard	IEC 62321: 2013, EPA3050B:1996, EN1122:2001, EPA3052:1996, EPA3060A, etc.
Other	Dimension	1153020mm (LWH)
Other	Weight	0.1kg
	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. I/P-O/P: Input and output interval, I/P-FG: Input and enclosure, O/P-FG: Output and enclosure